Building A New Home? 3 Ways To Maximize The Efficiency Of Your Heating System

If you're in the process of designing your own home, you have a lot of issues that need to be taken into consideration. Your heating system is one of those issues. With the proper installation, your heater should keep your entire home comfortably warm. Unfortunately, a lack of planning can leave you with cold spots in your new home. Those are the areas of the house that don't get warm no matter how high you turn the thermostat. Here are three steps you'll need to take to ensure your heater works efficiently.

Thermostat Located in Proper Area

Your thermostat is responsible for reading the inside temperature of your home. For it to work properly, it needs to be located where the air temperature is consistent. Place your thermostat near a door it may register a lower temperature, which means the heater will cycle on more than it should. This is because of the cold air that will blow in each time you open the door. Install the thermostat in a warm corner of the house and it will register that your home is the right temperature even when the rest of the house is freezing. For best results, have your thermostat installed away from exterior doors and warm corners.

Ductwork is too small for your Home

Your ducts are responsible for dispensing heated air throughout your home. If the ductwork is too small, the proper amount of air will not be able to get through to your home. As a result, your home won't get as warm as it should. Before you have the ductwork installed in your home, make sure it is large enough to accommodate the size of your home.

There's a Sufficient Number of Vents

Once the air goes through the ducts, it enters your home through the vents. If there aren't enough vents located throughout the house, you'll experience cold spots, or even cold rooms. There should be at least one vent in each bedroom and bathroom. Larger rooms will require additional vents to warm them properly. Be sure to talk to your heating contractor about the best way to maximize heating efficiency in each room.

If you're having your home built from the ground up, you want to make sure your heating system will be up to the task. The tips provided here will help you plan for your homes heating needs. For other tips on how maximize the efficiency of your new heating system, be sure to speak to your contractor.


Share