3 Mistakes Homeowners Make When Repairing A Stained Glass Window In The Home

It's a lovely accent in the foyer, an attractive focal point in your upstairs bedroom, or a beautiful finish to your front door–stained glass adds something to a structure that a regular window simply cannot. These artistic creations have been implemented into homes and other buildings for a lot of years, so your chances of inheriting one with a home purchase is possible. If you have an older stained glass window that has a damaged or missing piece of glass, you may be tempted to tackle this project on your own. Yet, repairing stained glass windows is no easy feat. In fact, there are several common mistakes that can be made during the process. 

Mistake: Not taking out the window before working on it. 

Why? You may be thinking that the easiest way to repair your stained glass window will be to leave it in place, but this is not the case. Because a stained glass window is several pieces of glass held together by solder, leaving it in an upright position when you are removing or replacing a piece can put undue stress on other pieces in the window. This can leave you with even more damage than you intended to fix in the first place. The stained glass window should be fully removed and laid on a flat surface before you begin fixing any problems. 

Mistake: Not being careful enough when removing broken pieces of glass.

Why? The glass in the design of a stained glass window is held in place by foiled solder. While solder is strong, it can be pulled out of its position in the intricate glass design. If you have a broken piece that you need to remove, you have to take great care not to pull the older around the edges away from the surrounding glass. If you do, several other pieces could break or fall out of place. 

Mistake: Not using the right kind of glass for replacement pieces. 

Why? Some stained glass windows are really old, which means replacing broken pieces can be extremely difficult to achieve and make the finished project look right. You can easily get the stuff to cut and replace the glass on your own, but unless you have access to fabricated specialty glass, the fit will likely not be perfect. Even if you do attempt a DIY repair, make sure yo entrust a glass shop for the pieces you need to replace broken or missing ones.