Going to DIY Your Vinyl Siding Installation? Tips to Get It Right

Vinyl siding is fairly easy to install, and many homeowners make the decision to install it themselves to save costs. If you have been considering the same and want to install your own siding, there are a few things that you need to consider. Since improper installation can leave your home vulnerable to damaged siding, water leaks, and pest infestations, understanding how to combat these risks during the installation process is key. Here are some tips to help you do just that.

Choose the Right Starter Strips

The starter strips go at the base of your wall and along the foundation. They create the initial surface for siding installation, and they also form a barrier that protects against pest infestations and weather damage. The wider the strip, the further it will extend below the foundation wall, and the more protection you'll have. Opt for the widest strip that you can get to ensure protection.

Seal the Corner Posts

If you can find vinyl siding that includes corner post caps, invest in them to seal off the corner posts during installation. These corner posts are a prime area for pest infestations, especially rodents. Capping them off helps to prevent this. In the event that you can't find caps for your corner posts, you can seal them off by trimming the channels on the posts and tapping the edges so that they fold over the ends and block them off. Just remember that you need to work with warm vinyl if you're doing this, because it will crack if it's too cold.

Reduce the Risk of Separation

Your vinyl siding strips should lock tightly together, reducing the risk of them separating. Since separation between the strips can allow air to get beneath them and possibly rip them off the house, this is an important consideration. When you get ready to nail a strip of vinyl siding in place, lift up on the siding strip first. This ensures that the channel is tightly locked on the strip beneath before you secure it in place.

Cover the J-Channels

J-channels, which run along the top and sides of your doors and windows, can collect water. This can lead to water accumulation against your house, which may ultimately cause water damage. You can minimize this by sealing off the J-channels. The easiest way to do this is by installing a longer J-channel than you need over the windows and doors. Allow it to extend over each side just enough that it covers the top of the channels on each side. This will block water from running into them.

Contact a vinyl siding professional for more information or assistance.